Find a better place for a faster printing pace
Meet every challenge effortlessly
Make media fit your audience
Be mobile, stay productive
Fortify your data security
Track your performance
Be energy-efficient and eco-friendly
*EPEAT Gold rating is applicable only in the USA.
Simplify everyday management and maintenance
Need more information?
Configuration | Desktop |
---|---|
Technology | LED |
Operation Panel | 4-line LCD |
Black & White Speed | 45 ppm (Letter)/43 ppm (A4) |
Maximum Duty Cycle | 150,000 prints |
First Print Speed | 5 seconds |
Warm-Up Time | 19 seconds |
Print Resolution | 1,200 x 1,200 dpi |
Standard Paper Capacity | 500 sheets + 100 sheet bypass tray |
Maximum Paper Capacity | 2,100 sheets |
Supported Paper Sizes | 5.5” x 8.5” - 8.5” x 14” (A6-A4, B6) |
Supported Paper Weights | Paper tray(s): 14 - 58 lb. Bond (52 - 220 g/m²) Optional paper tray(s): 14 - 58 lb. Bond (52 - 220 g/m2) Bypass tray: 14 - 68 lb. Bond (52 - 220 g/m²) |
Supported Paper Types | Plain, Recycled, Special, Colored, Letterhead, Cardstock, Pre-printed, Bond, Coated, Envelope, Label, OHP |
Power Requirements | 120-127V/12A 60Hz |
Power Consumption | Max: Less than 1,360 W |
Typical Energy Consumption (TEC) | 0.499 kWh/week TEC value is measured based on the ENERGY STAR Ver.3.0 test method. |
ENERGY STAR Status | Certified |
EPEAT status | Gold |
Dimensions W x D x H | 14.76" x 16.22" x 12.24" (375 x 412 x 311mm) |
Weight | 42.5 lbs. (19.3 kg) |
Hard Disk Drive Option Type P18
ID: 418438
- The Hard Disk Drive (HDD) is required for Locked/Hold/Stored Print. Data Overwrite and Encryption are available when the HDD is installed.
Caster Table Type M34
ID: 418143
- The caster table must be added to the configuration when three optional paper feed units are installed. It provides a platform with wheels to easily move the device.
Medium Cabinet Type P
ID: 52005
- Raises the height of the system while providing businesses with a convenient option for the storage of supplies and paper.
- Can only be configured with either one or two optional paper feed units.
- Weight: 35.3 lbs. (16 kg)
- W × D × H (inches): 14.6 × 15.4 × 11.2
- W × D × H (mm): 371 × 391 × 284
Paper Feed Unit PB1110
ID: 418080
- Provides an additional 250 sheets.
- Paper sizes up to 8.5" x 14".
- Paper weights up to 14 lb. Bond/120 lb. Index.
- Weight: 10.58 lbs. (4.8 kg)
- W × D × H (inches): 14.6 × 15.5 × 3.8
- W × D × H (mm): 371 × 394 × 97
Paper Feed Unit PB1120
ID: 418081
- Provides an additional 500 sheets.
- Paper sizes up to 8.5" x 14".
- Paper weights up to 14 lb. Bond/120 lb. Index.
- Weight: 12.13 lbs. (5.5 kg)
- W × D × H (inches): 14.6 × 15.5 × 4.9
- W × D × H (mm): 371 × 394 × 124
Notes:
- Caster Table Type M34 is required when three optional paper feed units are installed.
Tall Cabinet Type Q
ID: 52006
- Raises the height of the system while providing businesses with a convenient option for the storage of supplies and paper.
- Can only be configured with the standard configuration.
- Weight: 49.8 lbs. (18.5 kg)
- W × D × H (inches): 14.6 × 15.4 × 20.8
- W × D × H (mm): 371 × 391 × 528
IEEE802.11 Interface Unit Type M24
ID: 407863
- Allows MFP device to connect to the network over WiFi. Useful for temporary sites and locations where cabling is impractical.
IPDS Unit Type P18
ID: 418442
- For use in AS/400 environments.
Notes:
- 1. Hard Disk Drive Option Type P18 must be selected to add this option.
- 2. Target availability is December 2019.
PostScript3 Unit Type P18
ID: 418439
- Genuine Adobe® PostScript®3™. Recommended for printing more complex B&W and PDF files.
Notes:
- This option is available for customers who require True Adobe® workflows like Photoshop®, Illustrator® and PDF/X as well as additional font support. When enabled on the MFP, the standard PostScript3 Emulation will be disabled.
USB Device Server Option Type M19A
ID: 418105
- An interface board for adding an extra Ethernet port. If you install the USB Device Server Option, you can connect two Ethernet cables simultaneously: one to the machine's Gigabit Ethernet port and one to the Gigabit Ethernet port of USB Device Server Option. An IP address can be assigned to each connection and you can use one machine to print from different network segments.
Notes:
- USB Device Server Option Type M19A cannot be installed with IEEE 1284 Interface Board Type M19, IEEE 802.11a/g/n Interface Unit Type M19, File Format Converter Type M19, or Extended USB Board Type M19.
ESP XG-PCS-15D Power Filter
ID: 006428MIU
- The ESP XG-PCS-15D power filter provides multi-stage power protection as well as line conditioning. Our Advanced Technical Support (ATS) recommends the use of Power Protection products to minimize potential electrical interference with products.
Notes:
- ESP XG-PCS-15D Power Filter cannot be installed with the ESP S1 Power Filter.
VM Card Type P18
ID: 418065
- The VM Card enables the installation of embedded software applications.
Notes:
- Hard Disk Drive Option Type P18 must be selected to add this option.
Download Manuals
How-To-Videos
Learn about common tasks, topics and features as explained in more than 150 short video tutorials for our most popular devices.
Download Brochure
@Remote
Easily and automatically install the latest drivers for your Ricoh product.
MyRicoh
If you are a current Ricoh Customer, you can use MyRicoh to get support for your products, purchase supplies, and much more.
Knowledge Base
Access Ricoh’s comprehensive electronic database for driver and utility information, device documentation, troubleshooting assistance and more.
Do more for your business
Managed Print Services
Help reduce consumption and lower the cost of your print environment